Has anyone gotten PathPilot running on a Torus Pro?
After some awesome help from Brian in the other thread, I've gotten PathPilot to move all the Axis's and turn on the spindle. I am using most of his .ini and .hal files. Brian got PathPilot working great on a pulsar.
Problem is that the Torus and the Pulsar use different types of spindles. The Torus uses a VFD controlled spindle, and the Pulsar has a servo. This requires a ton of different settings to get the spindle speed to work for the Torus. Currently my spindle turns on, reverses and goes forward correctly but the speed goes to maximum.
Anyone solved this for a Torus Pro? i.e. you have installed PathPilot and have gotten your Spindle to correctly react to speed changes? If so, I could sure use your .ini and .hal files!
Thanks!
Scott...
Instructional Videos for CNC Guitar Building
http://www.rmgvideos.com