[guhl]

Can't find any info about meldas 320 CNC - PLC interface
I mean where are strob pulses, M, S, T-codes registers, M, S, T FIN pulses?

[botha.y]

For M320, M function complete 1 signal FIN1 is Y226 and M function complete 2 signal FIN2 is Y227.
For the registers:
M code Data 1:R20 and R21
M code Data 2:R22 and R23
M code Data 3:R24 and R25
M code Data 4:R26 and R27
M code Data (5?? not sure double check): R28 and R29
T code Data 1:R36 and R37
T code Data 2:R38 and R39
Spindle command rotation speed input: R8 and R9
Spindle command end data: R10 and R11
Effective rotation speed of spindle: R18 and R19

Cheers.

[guhl]

thank a lot