I have had this project in the back of my head for a long time now. Work has been extremely busy
so every once in a while I get out to the garage and make a piece or two. I'm going to build a
1970 Ruttman Wild Goose mini bike.

　
When I was a kid we used to ride bikes just like this one. That is what got me going on this thing.
It will be in it's original chrysler code FC7 Plum Crazy purple color. I'm still in the stages of gathering
information to get as original as possible.
　
I have enough information to start on the frame. To build the frame I will need 4 fixtures. One fixture will be
a bending jig to bend up the frame and handle bars. The second will be a simple thing to help get the rear
axle bracket in the correct place. The third will be used to hold the frame together for assembly. The last
one will hold the triple tree together for assembly.
The bending fixture has taken over 2 months just on it's own. It has 4 setups. 2 to bend the frame and 2
to bend the handel bars and forks.