Does anyone know how to peck tap on a HAAS?
Does anyone know how to peck tap on a HAAS?
Al DePoalo
Partner Product Manager BobCAD CAM, Inc. 866-408-3226 X147
No but this might be worth a look
http://www.cnczone.com/forums/genera...d-tapping.html
Make sure you have rigid tapping parameter turned on. forget which one though, consult manual.
1/4-20 example
G43 G00 Z.2
S200 M5
G84 G98 Z-.1 R.2 F10.
G84 G98 Z-.2 R.2 F10.
G84 G98 Z-.3 R.2 F10.
G80
G00 (Next hole location)
Yup, Beege is right. That's how we do it when we peck tap. Works fine.
Haas just put out video on this.
https://www.youtube.com/watch?v=yBK1MN_Q9J0
Hi,
I use ONECNCXR5 Mill Professional.
It has pecking tapping already built into the software.
Just pick either 2 level or 3 level peck tapping and fill in the desired peck depths and presto you have it all done for you automatically. If you look at the right side of the screens you will see where you fill in the desired pecking depths.
John
2007 HAAS TM-1P OneCNC XR5 Mill Pro. Shopbot PRT running Mach3 2010 Screen Set, Super PID and PMDX Electronics.Check out my Gallery on: http://[email protected]
what a stupid way to peck tap, on fanuc you just add Q3 for example, it'll do same thing as in drilling cycle.
why can't it be done that way on haas in g84?