I want to lock the tool pocket to a specific tool no so if a operator takes a tool out offline he knows where to return it. I have a job set to start that will use replacement tools to be set offline and want to reduce confusion.
The manual states 7267.0 through .3 is for the tool pockets but I have an option of 0 through 5 for each. Does anyone know which is the correct parameter?
Manual reads as follows;
MP7267.0 Tool Number - :0 to 5
MP7267.1 Special Tool - :0 to 5
MP7267.2 Fixed Pocket -:0 to 5, I think this is the one, it is set to 3 now.
MP7267.3 Pocket Locked-:0 to 5
Results 1 to 2 of 2
-
09-17-2011, 05:03 PM #1
Member
- Join Date
- Dec 2010
- Posts
- 152
Locking the tool pockets to a tool number
-
09-18-2011, 05:55 PM #2
Member
- Join Date
- Dec 2010
- Posts
- 152
Found the solution. The above is only for how the columns are displayed in the tool table. This is handled in the pocket table by fixing the tool and pocket numbers.
Reply With QuoteSimilar Threads
-
88HS tool number
By voytek1 in forum FadalReplies: 5Last Post: 07-18-2011, 07:03 PM -
tool number disappear after power off
By mcv300 in forum FanucReplies: 7Last Post: 02-04-2011, 02:04 PM -
X5...Changing Tool Number
By Lafaso870 in forum MastercamReplies: 1Last Post: 12-10-2010, 06:08 PM -
Tool number question
By Larry Myers in forum Sharp CNCReplies: 6Last Post: 08-22-2010, 04:15 AM -
Missing Tool Number
By barbter in forum NCPlot G-Code editor / backplotterReplies: 1Last Post: 10-04-2008, 04:07 PM
Tags for this Thread
Posting Permissions
