Hi,
I am new to CNCZone. I have toyoda FA450 HMC having Fanuc 15M controller. It has spindle speed range of 100-12000 rpm. I have taping operation in one of my job which needs 50 rpm spindle speed. when I execute M3 S50 command, it shows following error;
AL26 S-code out of range
AL33 S-Code instruction nothing.
I understand that my spindle speed value is 50 which is not in range. is there any way to change spindle speed range to "50 - 12000 or less rpm" instead of "100-12000 rpm"
Thanks in advance,
Mukesh