Hi there, I'm looking for a D.I.Y board for a cnc router I'm building using nema 23 3.0A/phase 3.6v bipolar step motors. Can you supply or know of anywhere I can get a circuit or the bits for a board suitable for these motors? I'm also looking for a circuit or bits for a power supply I have a 24v 5A transformer do you think this would be OK for the supply? I'm in Australia so everything over here is 240v.
Thread: I need a D.I.Y. driver board
Results 1 to 2 of 2
-
02-24-2008, 08:42 PM #1
Registered
- Join Date
- Feb 2008
- Posts
- 14
I need a D.I.Y. driver board
-
02-24-2008, 08:48 PM #2
Community Moderator
- Join Date
- Mar 2003
- Posts
- 35538
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Reply With QuoteSimilar Threads
-
single axis driver and a b.o.b.,or multi-axis driver board
By .xXACEXx. in forum Stepper Motors / DrivesReplies: 3Last Post: 07-03-2007, 05:13 AM -
Driver board basics
By tante in forum CNC Machine Related ElectronicsReplies: 7Last Post: 12-30-2005, 05:33 PM -
New and need your help Please (driver board)
By Oldmanandhistoy in forum CNC Machine Related ElectronicsReplies: 17Last Post: 06-12-2005, 10:48 PM -
driver board
By mtaddei in forum Benchtop MachinesReplies: 1Last Post: 11-19-2004, 09:13 PM -
High amp driver board
By jimglass in forum CNC Machine Related ElectronicsReplies: 1Last Post: 04-10-2003, 02:46 AM
Posting Permissions
