[darson]

Dear friends of CNC ZONE, Fanuc 6M is new for me please any one help me for starting my machine this is a Kitamura Mycenter-2 Model:1981 System 6M Fanuc serial-10227 and series-901.If any body have manual or any thing which can help me in starting my machine i am really thank full ......my email is [email protected]

[Al_The_Man]

You may want to start with how far you have got, any alarms?
The 6 requires the correct phase rotation on the 3ph supply at hook up time.
Al.

[darson]

You may want to start with how far you have got, any alarms?
The 6 requires the correct phase rotation on the 3ph supply at hook up time.
Al.

Thanks dear yes i already solved it with a digital 3 phase supply.Actually i want to learn its programing and controlling.If you have please help

[DouglasR]

Programming and controlling the Fanuc 6M is straightforward and not too difficult. It's G-code system is industry standard and its setup, offsets, and work coordinates are basic and easy to do.

[darson]

Programming and controlling the Fanuc 6M is straightforward and not too difficult. It's G-code system is industry standard and its setup, offsets, and work coordinates are basic and easy to do.

DouglasR: Thanks do you have any proper data about fanuc 6m ?If any one have any 6m controlling and programming data please send me i have kitamura mycenter-2 model 1981 with fanuc 6m system and i am i don't have any manual or book.I am newer in this field so kindly help me any one who know about this system and codes.Thanks.