Hi all, I'm automating my Bf20l and I bought a C6 Board in CNC4PC but am unable to connect to the pot without me jump the gap.
Someone has put it?
The BF20L is Similar to G704, but the plate is different.
Hi all, I'm automating my Bf20l and I bought a C6 Board in CNC4PC but am unable to connect to the pot without me jump the gap.
Someone has put it?
The BF20L is Similar to G704, but the plate is different.
Maybe this video will help.
Hoss
[ame=http://www.youtube.com/watch?v=daxbxahGGd4&feature=plcp]G0704 C6 Spindle Control.wmv - YouTube[/ame]
http://www.hossmachine.info - Gosh, you've... really got some nice toys here. - Roy Batty -- http://www.g0704.com - http://www.bf20.com - http://www.g0602.com
Thanks Hoss, I saw this video a bunch of times and others who have "c6 demo"
but the connection of the potentiometer on my motherboard (BF20L) is not equal, I found comexion pins P1 and P2 and the problem I have it in my breakout board that runs wild with a C10 and buy opto.Ya certainly going well.
Thank you very much for your help and congratulations on your achievements with the mini machines.
Leveraging know if they support the spindle of BF20L (MT2) and G704 (R8)
I want to ATC.
Thanks Fellow of the metal.