[jaredp]

I'm designing a 3 axis mill and want to use a 4th axis for a tool changer, does anyone know if this software will allow you to program a 4th axis through macros (like a fanuc pmc controlled axis)?
Also does anyone have any sugestions for a I/O card to use, I'm looking at using a hobbycnc stepper controller for the motors?

[ger21]

I'm designing a 3 axis mill and want to use a 4th axis for a tool changer, does anyone know if this software will allow you to program a 4th axis through macros (like a fanuc pmc controlled axis)?

You should be able to do what you want. Download the demo and play around with it. It's fully functional.

[DennisCNC]

It might be simpler to use of these, as they can do all PLC function and then some:

http://cubloc.com/product/01_01.php

http://cubloc.com/phpBB2/viewtopic.p...7fec3a9c94c54e

[zedomax]

Check this out hack using CUBLOC and steppers...

http://www.zikiwiki.com/wiki/Hacking_CUBLOC#Hack_.233