Hey guys, I get butt load of info from this site and I figured I would share mine seeing no one has beat me to the punch, that I know of. I came across this article in one of my wood working magazines and I know this is sorta a hot topic that is brought up from time to time. How do you hold down you work. Well in Woodcraft magazine they show you how. The articles name is "A Cinch to Clinch"
I tried to download the pdf. for you all with all of the measurements but the pdf. is to large. If you go to woodcraftmagazine.com and go to the projects section you can check it out. If you are not a subscriber or buyer you can use the password " Mentor" for the month that the article is out. You will insert this password in the section that says Benchmarks.
I have not built these yet and probably wont until my table is done but if someone does complete these could you post more pictures and what you think of them.
I have attached a few photos of what they are suppose to look like.