hello we have a Hitachi Seiki 4NE-600 lathe and it's giving me a code of "048 REF RTN" what they mean and How can I solve this problem?
where can I find a list of all the alarm codes and
thank you
Thread: Refernce return error
Results 1 to 2 of 2
-
02-22-2010, 11:34 PM #1
Registered
- Join Date
- Feb 2010
- Posts
- 0
Refernce return error
-
02-23-2010, 12:26 AM #2
Gold Member
- Join Date
- Mar 2003
- Posts
- 2932
You don't specify what model Fanuc you have. The only explanation for alarm 048 is from the 6T- Model B Operator's Manual:
"G30 was specified without performing reference point return after the power was turned on or an emergency stop was executed.
A move command was executed without performing reference point return after the power was turned on or after an emergency stop was executed which incluedes optional stored stroke limit."
Sounds like you need to do a manual Reference Point Return (home).
Reply With QuoteSimilar Threads
-
Zero return
By bubba107 in forum EMCO MillsReplies: 0Last Post: 10-22-2009, 01:49 AM -
Return to Zero
By mikemill in forum Machines running Mach SoftwareReplies: 0Last Post: 08-25-2009, 08:47 AM -
Zero return problem, 11M
By force2eng in forum FanucReplies: 14Last Post: 03-09-2009, 01:16 PM -
Z return margin error
By Shotout in forum Haas MillsReplies: 3Last Post: 10-15-2006, 04:05 PM -
Fanuc 18M Z return
By pinguS in forum FanucReplies: 12Last Post: 07-27-2006, 03:43 AM
Posting Permissions
