what would be the best breakout board to get for CW250 steeper motor drivers.
it is for a 3 axis gantry cnc router with a rotary table, 5 CW250 in total.
thinking of using a c10 breakout board
what would be the best breakout board to get for CW250 steeper motor drivers.
it is for a 3 axis gantry cnc router with a rotary table, 5 CW250 in total.
thinking of using a c10 breakout board
or could use MB-02-V6 Bidirectional Breakout Board from Homann Designs, what do people think will be best