587,997 active members*
1,522 visitors online*
Register for free
Login

Thread: MasterCAM X post processor

Results 1 to 3 of 3
  1. 04-26-2007, 12:25 AM #1
    rodzilla
    rodzilla is offline Registered
    Join Date
    Jul 2005
    Posts
    59

    MasterCAM X post processor

    I am having trouble getting a post processor file that works with MasterCAM X. I created a part using this but when i cut it the holes came out fine but the profile di not it cut the outter edge of the part way to close to the hole leaving not enough material to make it usefull. But when i created the same part using Visual Mill 5 i had no trouble the part cut fine is there a usefull post processor for MasterCamX to use with Mach3 could someone please help me with this problem
    Reply With Quote Reply With Quote
  2. 04-30-2007, 11:44 PM #2
    billystein
    billystein is offline Registered
    Join Date
    May 2006
    Posts
    132
    i would be happy to help you out. if you can send me your current post I will start to fix it for you. a few try outs should do it. I have done plenty of posts.


    billy
    Reply With Quote Reply With Quote
  3. 05-08-2007, 11:09 PM #3
    sdopp
    sdopp is offline Registered
    Join Date
    Apr 2005
    Posts
    65
    Are you sure your cutter comp was set right in X?
    Skip
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Mastercam VTL post processor.
    By jrebel in forum Post Processors for MC
    Replies: 5
    Last Post: 12-09-2006, 11:24 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules