If you have the X and Y co-ordinates then it's easy peasy-
Create a plain text file using WordPad or similar. Make sure it's got SCR as an extension.
Cut and Paste the X and Y co-ordinates into the file- one set per line and X,Y separated by a comma.
Make sure the first line of the SCR file says "PLINE" (without the quotes).
So, an example file would look like this:
PLINE
10.9876,1.2345
10.8765,1.3456
10.7654,1.4567
etc...
Save it somewhere you'll remember.
Boot up AutoCAD. Type in "SCRIPT" and select the file you just made- AutoCAD will import all the co-ordinates as a polyline. Ta Da!
If you need them as individual lines then just EXPLODE the polyline.
Hope this helps!
I love deadlines- I like the whooshing sound they make as they fly by.