Originally Posted by
jp41558
with the Direct Logic I can use an input to fire a control coil ( C ) and use that coil's contacts further in the ladder. I have not been able to figure the similar coil and contacts with the AB PLC. Any help or information would be appreciated.
This feature is available with AB PLC's, in fact I have never come across a PLC that does not have it.
What software are you using?
You need to get a copy of the 'SLC500 and MicroLogix 1000 Instruction Set Reference Manual'.
This explains the architecture and is complete with examples.
Al.
CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.