[ghostlx]

While Nate is putting finishing touches on my fla 2x4 r&p I have beeen busy building my control box .
picture 1 is what is left from a old 240 watt power supply..
This let me have a fused link and a :idea::idea: switch and a exaugst fan in one.
Ran 3 wires from here to a 120vac plug in to have extra 115 power inside the case.
and the on to the power supply leaving slack so i could slide the power in or out if needed to add more goodies later,
but here are the first 3 pix
more to come
ghostlx

[ghostlx]

Here is a few more.
first a is a side view of the case , rear view , front view.and a close up of g 540.
total cost case 0$ only cost is fan 8$ , electric box 4$, outlet 2$, 12vdc charger 1$,
4 pin connector 2$, a gecko540 299$, 48vdc power supply 139.00$. and don't for get cables and motors. not a bad set up
ghostlx