Hi,

I recently changed the memory card on my Tsugami Lathe because I got a ROM error. The controller is a Fanuc 6T, version 4

It seem that the cluch of the spindle is not engaged when I start the machine. When I start the spindle (around S2000), the spindle turn at around 50RPM and I'm able to stop it with my hand. The RPM indicater is at 2000RPM. So I think the cluck is not engaged and the spindle turn with a little friction of the clutch. Do you know what cause that?

I have a second problem concerning the tool change. The turret disangaged,turn, re-engaged and then the turret alarm ligth on. I must to restart the controller to close the turret light.

Please help me. The company that sold me the memory card told me that it's not the fault of the card. Maybe a parameter or a setting.

Thanks