So today at work i was cutting an M24 thread
got everything setup and wrote a program. Ran the first part and threads were short by .5000?? checked my program it was ok??
program was like this for thread
N8T0808(M24-3 THREAD)
G97S1000
G0G54G99X0.975Z0.2M8
M24
G92X0.929Z-2.3F0.1181
X0.909
X0.884
X0.878
X0.863
X0.848
X0.833
X0.813
X0.808
X0.803
X0.8
G0Z0.2M9
G28U0W0T0M5
M30
To Make the Part write I changed to this:
N8T0808(M24-3 THREAD)
G97S1000
G0G54G99X0.975Z0.2M8
M24
G76X0.8Z-2.3R0P0663Q10F0.1181
G0Z0.2M9
G28U0W0T0M5
M30
Mori had no answer for my problem
Does anyone?
I Like G92 more then G76 and have used it many times on this machine to thread its alot faster then G76?
Fanuc 16TT control