I have a VH65 rotary table on eBay if anyone is interested.
http://cgi.ebay.com/Fadal-VH65-Rotar...QQcmdZViewItem
Thanks for looking,
Ed
I have a VH65 rotary table on eBay if anyone is interested.
http://cgi.ebay.com/Fadal-VH65-Rotar...QQcmdZViewItem
Thanks for looking,
Ed
How much do you need out of it?
FYI
When I bought mine a couple of years ago shipping and brokerage into Canada cost me $400.
These are $10k new.
I see them going for 5k at equipment dealers.
I paid $2500 for mine (like new condition).
I hope this info is of use to somebody.
Edster - you should have no problem moving this item.
www.integratedmechanical.ca
I paid around 2500 a few years ago, I don't remember the exact price. I'm hoping to get around 2500 for this. It's amazing how much fadal wants to install this table to my mill. 5-6k. My new Haas TM-1 was 2k for everything installed to run a 4th. Another 8k for the Haas HRT160 6.3 inch rotary table with chuck and tailstock. Fadal seems rediculiously priced on their 4th axis stuff. I'd probably would keep it, but I don't even see used fadal control boxes on eBay, tons of haas stuff but hardly any fadal stuff.
Is it possible to use a Haas box to drive a Fadal rotary table? I would like to be able to run my Fadal VH65 table with an indepentant control box.
Thanks,
Scott