I bent the adjusting screw on my X4+. Does anyone know if the Z-axis gibb adjusting screw on the X4+ is the same as the adjusting screw on the Grizzly SX3 mill (G0619)?
Syil America does not have them (they did tell me they could have one shipped from China... IN 90 DAYS).
Grizzly sells the one for their SX3 for $2 (Shipping will cost me $7)
Thread: X4+ Z-axis gibb adjusting screw
Results 1 to 2 of 2
-
10-19-2009, 10:23 PM #1
Registered
- Join Date
- Jan 2009
- Posts
- 39
X4+ Z-axis gibb adjusting screw
-
11-08-2009, 08:25 AM #2
Registered
- Join Date
- Jan 2009
- Posts
- 39
Answer
Ok, so since no one chimed in on this and Syil America didn't know
, I ordered one of the screws. Its the same adjusting screw that's on the X4+ mill.
It's part 77 with a Grizzly P#P0619077. Cost ya $2
http://www.grizzly.com/products/G0619/parts/1
Reply With QuoteSimilar Threads
-
Adjusting Y axis backlash Boss 6.1
By creep_pea in forum Bridgeport / Hardinge MillsReplies: 5Last Post: 08-23-2008, 07:31 PM -
adjusting z axis jib with brake
By 300sniper in forum Tormach Personal CNC MillReplies: 5Last Post: 08-20-2008, 01:19 AM -
Adjusting the Z-Axis Gibb
By thackman in forum Syil ProductsReplies: 0Last Post: 03-31-2008, 01:37 PM -
Gibb adjustment help
By TT350 in forum Tormach Personal CNC MillReplies: 11Last Post: 11-15-2007, 03:04 PM -
having problems adjusting y axis
By farr_t in forum Commercial CNC Wood RoutersReplies: 2Last Post: 12-05-2006, 05:07 AM
Posting Permissions
