Rigid tapping works find, but after rigid tapping cycle and tool returns to Z home it goes through tapping cycle before changing tool. What's going on?
Thanks for any help anyone has to offer.
cncfish
Rigid tapping works find, but after rigid tapping cycle and tool returns to Z home it goes through tapping cycle before changing tool. What's going on?
Thanks for any help anyone has to offer.
cncfish
Did you isue the G80 cancel code BEFORE you send the tool home?
Neal
Thanks Neal
Works fine when I added G80. I've been using the F function to end program but it put a Z0 G53 line in and program want run so I've been deleting that line. Put line back in & changed G53 to G80
problem gone. Thanks again
CNCFISH