Originally Posted by
ddexd
I wonder if they are phasing out the X2. I just picked one up yesterday for $200. Of course it was the display model, but the only thing missing/wrong with the mill was missing the small handle that screws into the Y axis hand wheel. Of course they didn't have the cheap set of tools that usually is included, but you don't really need them.
Very excited about the purchase. Just need to spend a little time cleaning it up.
One other note, they had the 9X20 lathe marked down to $300. I didn't have my pickup truck or I would have picked up the lathe as well. But since I already had a 9x20 lathe I opted for the X2 mill instead.
This was at the Baton Rouge, LA, Harbor Freight.