About ZM Series brushless motor
ZM Series brushless motor from the motor and drive body composition, motor body using high-performance rare earth permanent magnet material excitation, there is built-in motor position sensor to the location of the signal delivered to the drive, through electronic control circuit to the electronic exchange to replace the traditional mechanical reversing. It not only retains all the traditional advantages of DC motors at the same time to overcome the original structure brought about by the electrical discharge, electromagnetic interference, electromagnetic noise, are required to perform periodic maintenance, short life and many other defects. Is a new generation of energy efficient mechanical and electrical integration products. 它的主要特点如下: Its main features are as follows:
1. High efficiency and energy saving: brushless motor is a mechanical-electrical integration products, has the characteristics of high-performance point of relief, at the same time in the ZM series brushless motor on the rotor neither iron nor copper power consumption, the efficiency of asynchronous machine with the capacity to improve 5% ~ 12%. System (motor plus drive) up to 85% efficiency over the general.
2. Starting torque, and excellent torque characteristics.
3. Speed range, speed ratios exceeding 15:1.
4. Rotor moment of inertia of small, fast response, good controllability.
5. Fixed-speed and high precision, load torque from 0 ~ 100% rated torque fluctuations, the fluctuations in the rate of speed less than 1%.
6. A simple structure, high reliability and good stability.
7. Motor low noise, ZM Series 2000W following noise less than 60dB.
8. To contribute in the same conditions, and compared to other types of motor smaller and lighter weight.
Brushless motor products ZM-W92-1000/220 technical parameters Rated Voltage 220V Rated Power 1000W
Rated torque 2.6 N M rated current 6A
Speed 200 ~ 3600rpm maximum torque of 5.2 N M
Class F insulation rating IP54 protection rating