Hi and thanks for looking in,
This is more curiosity than necessity and could be a very short thread but I would appreciate any input.
What I would like to know is, is it possible to run a PC with Mach3 without a key board, monitor and via a laptop?
The idea would be to boot the PC and then access it via the laptop.
Why; because I have a PC for Mach3 and would need to invest in a TFT monitor and keyboard to go with it. I have an oldish laptop which incidentally would not run Mach3 direct so I wondered if this would work.
So
1, Cannot be done.
2, Can be done but would be more trouble than it is worth.
3, Can be done and reasonably easily.
4, Get a life.
If you believe #3 is correct can you please explain how or point me is the direction of more information.
John