Hello,
I am getting a E450 alarm on our Partner 9 when we do a manual tool release. My first thought was the tool clamp switch sticking and the machine alarms out when the unclamp switch is made. This is not the case, both switches are functioning properly and I can see in the diagnostics pages that they go from 0-1 and 1-0 as they are pushed. Any help or thoughts would be greatly appreciated.
Brian
Results 1 to 2 of 2
-
08-04-2010, 06:21 PM #1
Registered
- Join Date
- Mar 2009
- Posts
- 29
E450 Alarm on manual tool release
-
08-06-2010, 10:44 PM #2
Registered
- Join Date
- Oct 2006
- Posts
- 179
You are most likely loosing 24VDC when the switch is depressed. This can be caused from a faulty wire shorting out or the coil of the solenoid shorting out.
Reply With QuoteSimilar Threads
-
New Version Release: Tormach PCNC 1100 Manual
By ag53711 in forum Tormach Personal CNC MillReplies: 0Last Post: 09-24-2009, 05:17 PM -
Mazak VTC-20 Tool Release
By millerwl71 in forum Mechanical Calculations/Engineering DesignReplies: 0Last Post: 11-15-2007, 02:59 PM -
BP Interact 412 - Tool Release not working
By dpsol in forum Bridgeport / Hardinge MillsReplies: 4Last Post: 08-02-2007, 03:13 PM -
BP Interact 412 - Tool Release not working
By dpsol in forum Bridgeport / Hardinge MillsReplies: 0Last Post: 06-28-2007, 04:32 PM -
Tool Release Button,
By Ken_Shea in forum Haas MillsReplies: 3Last Post: 08-05-2003, 02:27 AM
Posting Permissions
