[seapacer2]

Hello All,

I'm new to this site and enjoying all of the information that is available here. I have inherited a Bridgeport that is in very good shape that has a Proto Trak Plus hanging on the side. Everything on this machine is operational, but however I recieved no information on how to operate this proto trak. Does anyone have availabe a copy of the manuals that came with this Programer? If so any inforation is greatly accepted.

Mark

[machintek]

There are a ton of manuals on the web site of Southwesternindustries.com who made that control. Try there.

George

[DMF_TomB]

Southwesternindustries.com has printed manuals on Prototrak plus

1) Operating manual and programing at the machine
2) is on using CAD Cam programs and the Gcode the Protorak plus accepts.

a local vendor may want to sell you the manuals for $50 each. often Southwestindustries will mail them to you occasionally for free. Try sending a email.

But a local vendor or distributor for Southwestindustries can get repair parts and do calibration. I had a Trav A Dial scale replaced with a modern linear scale as one of the Trav A Dials scales was worn out.

[Xuron]

Here is a link to the ProtoTRAK Plus Manual.
https://www.dropbox.com/s/2evbiq0igi...0Plus.pdf?dl=0

Here is a link to a ProtoTRAK Plus folder with other manuals and some programming sheets to use.
https://www.dropbox.com/sh/26r0c8fth...2977YO02a?dl=0