Hello,
The hand blow guns that come with the Haas machines (see attached photos) are AWESOME! However, they are really expensive, $40 each from the local HFO.
I doubt that Haas is the one that actually makes these... ...Do you know if there is a different place that I can buy them that is less expensive?
(Haas used to sell part number 59-0392 air gun for $20 each, but they discontinued it. They only sell part number 93-30-3793 Airgun/Hose assy for $40, but I don't need the hose, I only need the airgun.)
Thread: Source for Haas hand blowgun
Results 1 to 3 of 3
-
08-18-2011, 03:41 PM #1
Registered
- Join Date
- Aug 2011
- Posts
- 7
Source for Haas hand blowgun
-
08-18-2011, 04:41 PM #2
Registered
- Join Date
- Feb 2010
- Posts
- 1184
Closest I have found is Jupiter Pneumatics - MSC #62309554.
They have a different style safety tip but otherwise the same.
-
08-19-2011, 02:36 PM #3
Member
- Join Date
- Apr 2005
- Posts
- 903
I found this one for $7.99 (on sale) a few weeks ago from Enco.
Enco # PA327-7346 It is identical to the Haas one except for the nozzel tip. It even has the little indented part on the body where Haas glues their logo.2008 Haas VF2D
OneCNC XR5 Mill Expert
Reply With QuoteSimilar Threads
-
Art & Engineering, they go hand in hand for me
By twoartistic in forum Machine Created ArtReplies: 6Last Post: 08-20-2011, 06:33 AM -
Right Hand Left Hand thread ????
By drut in forum Mechanical Calculations/Engineering DesignReplies: 5Last Post: 07-24-2011, 06:08 PM -
How to make 2"1/2 NPT left hand threading on Haas SL-20
By parktoshi in forum Haas LathesReplies: 2Last Post: 04-08-2009, 11:27 PM -
Haas Spares source? Parts?
By ralph@nes in forum Haas MillsReplies: 2Last Post: 09-28-2007, 09:07 PM -
coverting from Right-hand to left-hand coordinate system
By eltonr in forum Uncategorised CAM DiscussionReplies: 6Last Post: 10-15-2004, 02:40 AM
Posting Permissions
