588,281 active members*
5,032 visitors online*
Register for free
Login
IndustryArena Forum > Community Club House > Do I Really Have That Much Spare Time!!??
Results 1 to 10 of 10
  1. #1
    Join Date
    Jul 2005
    Posts
    12177

    Do I Really Have That Much Spare Time!!??

    This post will bring my total to 9,998, approaching that magical round number of 10,000.

    I started to think (dangerous activity); how long does it take to type a typical post? Half a minute, ten minutes??? Some of mine have taken upwards of half an hour, some less than half a minute; so I chose four minutes as an average. Therefore since I joined CNCzone in the middle of 2005 I have spent about 40,000 minutes typing posts; that is 667 hours.

    Do I Really Have That Much Spare Time!!??

    Dividing it by the number of weeks since I joined makes it sound better at about 3 hours a week and then going further it is just under half an hour a day.

    So now I don't feel so bad because I never spend any time watching TV so overall my time wasting activities are minimal. And I like to think I am being more useful posting here than watching TV.
    An open mind is a virtue...so long as all the common sense has not leaked out.

  2. #2
    Join Date
    Aug 2009
    Posts
    684
    What about the time spent searching for a post to reply to?

    DP

  3. #3
    Join Date
    Dec 2003
    Posts
    24220
    Your catching up to me .
    Al.
    CNC, Mechatronics Integration and Custom Machine Design

    “Logic will get you from A to B. Imagination will take you everywhere.”
    Albert E.

  4. #4
    Join Date
    Oct 2009
    Posts
    272

    Time on my hands

    I must have more time to waste than I thought.
    Anyway, Geof and Al, I have learned a great deal from your posts. Please keep those informative posts coming. It is folks like you two that make the Zone such a great place.
    It seems that I only have 9976 posts(39,904 min.) to go.
    Geof, Al thanks again for the info and entertainment.

    Randy,
    I may not be good....
    But I am S L O W!!

  5. #5
    Join Date
    Mar 2006
    Posts
    2712
    I'd rather read your postings and when things get too calm, become a "bomb thrower". LOL

    Keep it up guys, somebody's got to hold up the old farts end. I just turned 69 after another ambo' ride and a few days in the ICU. OK now though.

    Dick Z
    DZASTR

  6. #6
    Join Date
    Jul 2005
    Posts
    12177
    Quote Originally Posted by RICHARD ZASTROW View Post
    ....Keep it up guys, somebody's got to hold up the old farts end. I just turned 69 after another ambo' ride and a few days in the ICU. OK now though.

    Dick Z
    Hang in there Mr Zastrow; who would I have around to defer to without you.



    christinandavid; What about the time spent searching for a post to reply to?

    Awe come on. I am trying to make it seem I don't spend an excessive amount of time here. YOU are NOT HELPING!!!!!.
    An open mind is a virtue...so long as all the common sense has not leaked out.

  7. #7
    Join Date
    Mar 2003
    Posts
    35538
    You could never post again, and stay right at 10K. But then you wouldn't catch me.

    And btw, I have no spare time at all.
    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)

  8. #8
    Join Date
    Jul 2005
    Posts
    12177
    Quote Originally Posted by ger21 View Post
    You could never post again, and stay right at 10K. .
    Whoops, too late. Now I might as well keep on going.
    An open mind is a virtue...so long as all the common sense has not leaked out.

  9. #9
    Join Date
    Nov 2007
    Posts
    1702
    Did you count PMs? (nuts)
    Greg

  10. #10
    Join Date
    Jul 2005
    Posts
    12177
    Quote Originally Posted by Donkey Hotey View Post
    Did you count PMs? (nuts)
    Never gave them a thought. I saved my PMs, both sent and received, in a folder on my Desktop and just counted something like 70 text files in that folder, and I have some saved on other computers so I guess they do add a siginificant amount to the total. Each text file has something like fifteen to twenty PMs or replies.

    Goodness knows why I am saving them but I have the disc space so why not.
    An open mind is a virtue...so long as all the common sense has not leaked out.

Similar Threads

  1. Spare M functions
    By 1ctoolfool in forum Haas Mills
    Replies: 5
    Last Post: 01-14-2008, 05:08 PM
  2. Spare Parts
    By Have Blue in forum Tree
    Replies: 16
    Last Post: 10-12-2007, 04:23 PM
  3. milling time (not to be confused with hammer time)
    By barefoot0 in forum G-Code Programing
    Replies: 4
    Last Post: 05-03-2007, 12:18 AM
  4. spare parts
    By bucont in forum Benchtop Machines
    Replies: 4
    Last Post: 09-10-2006, 06:31 PM
  5. What I'm doing with my spare time
    By Stevie in forum Hobby Discussion
    Replies: 0
    Last Post: 02-27-2005, 04:24 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •