NEED HELP CLEARING THIS ALARM
ALARMED OUT DURING TOOL CHANGE
YANG VMC1000
FANUC OM-D CONTROL
ALARM NO. 1007
"1007 MAG CTI NE CT2"
NEED HELP CLEARING THIS ALARM
ALARMED OUT DURING TOOL CHANGE
YANG VMC1000
FANUC OM-D CONTROL
ALARM NO. 1007
"1007 MAG CTI NE CT2"
Change DGN 455 value to match DGN 457, it should clear the alarm, make sure to turn on PWE=1 to change it.
Ahn Vuong
[email protected]
Thanks Ahn Vuong
Dear Sir or Madam,
Here at SpectroUSA Machine Tools we are the importer and tech support/service/parts center for all of the Yang/Yam Cadillac (Taiwan) brand CNC and manual machines in North and South America. We carry Engine Lathe, CNC Turning center, Vertical-Machining Centers, Tapping Centers, Horizontal Machining Centers, and Double Column machining center with 5 axis (Head or Table) or with 3 axis.
You can find more information about our machines at our website, www.spectrousa.com. On our site, you can view all of our products. Thank you for taking the time to view our website. If you have further questions please do not hesitate to contact with us at SpectroUSA.
I am looking forward to hearing from you!!
Thank you,
SpectroUSA Machine Tools Co
9716 Alburtis Ave
Santa Fe Springs CA 90670
Phone: 562-222-1808
Fax: 562-222-1820
Website: www.spectrousa.com