587,072 active members*
3,114 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Fadal > Troubleshooting New Glentek inverter issues.

Thread: Troubleshooting New Glentek inverter issues.

Results 1 to 12 of 12

Hybrid View

  1. 01-20-2019, 07:11 AM #1
    Jim Dawson's Avatar
    Jim Dawson
    Jim Dawson is offline Community Moderator
    Join Date
    Dec 2013
    Posts
    5714

    Re: Troubleshooting New Glentek inverter issues.

    Quote Originally Posted by destroyer125 View Post
    Mode switch is set correctly to the specs of the machine I have.

    I've read in other places that 6-7 ohms for the regen resistors in parallel is standard for the config of this machine. I attempted to wire them in series which gave me a total of 26 ohms and this did not solve my issue. Still getting DC Bus High on the inverter.
    Did you check the fuse? Should be a 10 amp slow blow
    Jim Dawson
    Sandy, Oregon, USA
    Reply With Quote Reply With Quote
  2. 01-20-2019, 08:02 AM #2
    destroyer125
    destroyer125 is offline Registered
    Join Date
    Feb 2007
    Posts
    45

    Re: Troubleshooting New Glentek inverter issues.

    Quote Originally Posted by Jim Dawson View Post
    Did you check the fuse? Should be a 10 amp slow blow
    I pulled the cover off the glentek and checked the 600v 10amp fuse...Which was good.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Glentek GA370-3
    By CPG in forum Milltronics
    Replies: 7
    Last Post: 10-21-2022, 01:09 AM
  2. Multicam CNC M24 Connection Issues MODBUS and Inverter Errors
    By retske in forum Multicam Machines
    Replies: 3
    Last Post: 11-01-2018, 12:54 AM
  3. Replaced Spindle Inverter in Omniturn GT-75 with a HY-04D0-23B (Chinese) Inverter
    By TAProwler in forum Hardinge Lathes
    Replies: 0
    Last Post: 08-28-2014, 01:51 AM
  4. Glentek GA4568E
    By bobecm in forum Fadal
    Replies: 0
    Last Post: 04-25-2008, 01:58 PM
  5. glentek amplifiers
    By yeepman2 in forum Fadal
    Replies: 1
    Last Post: 12-02-2005, 12:44 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules