[NCexplorer]

Hi NX expert,
Please guide me how to create icon/command menu, that I can right click to selected solid model, then the icon is come out, and when i execute it, the solid model I've been selected has moved to specific layer. This is i need to automatic process by NX macro, that solid which lies in layer 100 is set as part, and 101 is set as blank, 102 is check.

For next process, I just click template, then generate it, then post it.


NC explorer

[Brewmeister]

You can create macros for "Move to layer 100", "...101", "...102", then assign those macros to the "Customizable Radial Toolbars" <-- search this term in NX help

Assign the 3 macros to the "Radial 3" toolbar for Right-Mouse-Button.

[Brewmeister]

Sounds like a graphics driver problem.

Sometimes other graphics programs running at the same time will conflict with the graphics settings needed for a CAD system. Try closing all programs, then run NX by itself.
another trick, is in the Display Settings, some graphics cards will have a specific configuration for "CAD" or "NX / Unigraphics".

If none of that works...

Call GTAC 800-955-0000 or
Log an IR on the website: http://support.ugs.com --> Call Management --> Report an Issue.
Have your customer ID ready (NX --> Help --> Capture IR data --> OK -> Server ID
(will also list info about your computer, graphics card, etc... that GTAC needs)