Re: THREADING: How to add threading parameters to the Init file?
Thanks,
I have added channel settings, for Channel 1, where I have the encoder wired into now.
Added:
ConfigureSpindle(1, 1, 0.1, 0.1, 15000); // configures for type of Spindle feedback
Added this just before Defining the Axis... I do see that I get the counts, from the encoder. In the Axis screen.
But do not get any reaction from the G32 Z-1.0 F0.5 (20 TPI for 1.0 inch)...
The channel 1 is setup as Encoder input and no output mode... does anything else in this channel need set? I also enable this channel.
To recap: I set all the channel parameters, I configure the spindle; then I Define axis 0, 1, 2, -1.
Any help, to get action will be appreciated.
Robot & Machine Design - BLUECNC4, GreenCNC3, RedCNC2L, SilverCNC2; CNC Software!
www.truemachinedesign.com - - - - - - - - - - - - - www.truemachineautomation.com