We are looking for software that we can down load programs form various controls (5 different Fanuc versions & 2 Mori Seiki Models) into a lap top. We would also like to be able to interchange the programs between these controls and upload to a different control.
Any Recommendations appreciated.
steelhead9
Results 1 to 3 of 3
-
03-03-2009, 03:46 PM #1
Registered
- Join Date
- Jan 2009
- Posts
- 3
Software to backup and interchange programs between different controls.
-
03-03-2009, 04:40 PM #2
Gold Member
- Join Date
- Mar 2003
- Posts
- 2932
Predator DNC has a Search and Replace link for simple conversions. You can stack them up and make the changes "on the fly" as you send them or save the changes to the PC for sending later.
-
03-04-2009, 02:02 PM #3
Registered
- Join Date
- Jan 2009
- Posts
- 3
Thanks for the info, I'll look into it.
Reply With QuoteSimilar Threads
-
What software do you use to manage CNC Programs
By bfoster59 in forum DNC Problems and SolutionsReplies: 5Last Post: 01-24-2009, 05:12 PM -
Interchange Chart for LM components
By IQChallenged in forum Linear and Rotary MotionReplies: 1Last Post: 11-30-2006, 08:22 PM -
PDA software to transfer programs?
By WOLOG in forum DNC Problems and SolutionsReplies: 1Last Post: 05-04-2006, 02:12 PM -
2 hp to 1.5 hp motor interchange on vari-speed head??
By wdbdel in forum Bridgeport / Hardinge MillsReplies: 5Last Post: 12-16-2005, 04:34 AM -
API Controls software
By Stevie in forum Servo Motors / DrivesReplies: 2Last Post: 12-01-2005, 12:27 PM
Posting Permissions
