I am attempting to thread mill with mastercam (version 9.1). I tried it with a 1 inch by 8 pitch, using a 3/4 inch threadmill cutter (dovetail type), but I am missing something on my thread mill parameters page. Any help would be appriciated.
Thread: THREAD MILL
Results 1 to 4 of 4
-
03-06-2008, 10:24 PM #1
Registered
- Join Date
- Aug 2007
- Posts
- 95
THREAD MILL
-
03-06-2008, 11:24 PM #2
Registered
- Join Date
- Dec 2007
- Posts
- 32
you have an 8. inch thread pitch ya thats 8. inch's it should be .125 thread pitch
you never know what you can do, until you have to undo something you have done!
-
03-06-2008, 11:57 PM #3
Registered
- Join Date
- Aug 2007
- Posts
- 95
WOW!!!!!!!!!!!! That was it. Thanks for a quick response.
-
03-07-2008, 12:02 AM #4
Registered
- Join Date
- Dec 2007
- Posts
- 32
No problem any time
you never know what you can do, until you have to undo something you have done!
Reply With QuoteSimilar Threads
-
Thread Mill Program
By october in forum G-Code ProgramingReplies: 8Last Post: 07-20-2016, 02:36 AM -
Thread mill this?
By Shotout in forum CNC ToolingReplies: 22Last Post: 10-31-2009, 02:38 AM -
thread mill a 1" npt
By invs879 in forum EdgeCamReplies: 5Last Post: 01-19-2008, 04:31 AM -
Thread mill in XR2
By DSL PWR in forum OneCNCReplies: 2Last Post: 01-16-2007, 07:40 AM -
2-1/2 - 8 NPT Thread Mill Program
By wesleybridgepor in forum MetalWork DiscussionReplies: 2Last Post: 11-30-2006, 11:56 AM
Posting Permissions
