The E-Stop button is a big heavy one, cannot find any ratings on it, or numbers that look like ratings.
It has two sets of contacts, I’ll use one for the 5V to the breakout board.
The other one I plan to use to interrupt the 28V PS. To the Stepper control boards. Should I run 110V AC through the E-Stop or should I run the 28V DC through the E-Stop SW?
Thanks
Hager
Results 1 to 2 of 2
-
02-06-2007, 06:44 AM #1
Member
- Join Date
- Sep 2003
- Posts
- 1475
E-stop, Interrupt The 110v Ac Or 28v Dc?
-
02-06-2007, 03:49 PM #2
Community Moderator
- Join Date
- Dec 2003
- Posts
- 24222
As far as the voltage rating, they generally are rated for at least 250v.
whether you interupt the 110ac or 28v depends of course on your circuit.
Al.CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
Reply With Quote
Similar Threads
-
Using USA 110V Equipment on Euro 220V Mains!
By diarmaid in forum CNC Machine Related ElectronicsReplies: 121Last Post: 09-07-2021, 11:54 AM -
110v single phase bridgeport motor swap
By stanglou in forum Uncategorised MetalWorking MachinesReplies: 22Last Post: 10-14-2011, 12:41 AM -
inputio interrupt driven?
By howling60 in forum CamSoft ProductsReplies: 2Last Post: 02-10-2006, 08:38 PM -
Optical Switch w/Interrupt mechanism
By cnczane in forum DIY CNC Router Table MachinesReplies: 1Last Post: 11-10-2004, 03:51 PM
Posting Permissions
