[hacdlux]

i have a nl2000sy, curious if any body knows how to make the cycle time reset when running in continuosus mode,

i'm getting tired of the boss freaking out that the counter says 15 minutes when it has ran 3 parts not one( it is nice when it says 30 hours and the parts conveyor has overflowed onto the floor)

end of program

M89
/M99
M30

block delete is used by the parts counter to interupt the cycle.

[onthebumper]

The cycle counter is reset by the M30 command so I'm not sure if there is another M code that might reset the cycle counter. You may want to call Mori to find out.

[NL2000]

You can not reset cycle time when running in continous mode.