Hello everyone, so we had the solenoid valve replace, but unfortunately this isn't the problem, here a description maybe someone
can help Machine Okuma MX-55VA, when doing a tool change via MDI, Ex M6T1, the cycle stops at sequence # 9 and after 3 minutes
it gives error 3208 Alarm C, ATC System condition 102.
This tool change cycle consist of 29 sequences which am able to manually execute complete by pressing down the 1 step advance key
29 times everything seems to be working this way, is just when I go in MDI to try to execute a complete cycle, I'll contact Gosiger in
the morning, but I was just wondering if maybe some one on this forum knows anything about it.

Thanks,

Ernesto