587,235 active members*
3,561 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Fadal > FADAL control questions

Thread: FADAL control questions

Results 1 to 3 of 3
  1. 05-01-2006, 04:24 PM #1
    SIERRAMACHINE
    SIERRAMACHINE is offline Registered
    Join Date
    Apr 2006
    Posts
    24

    Question FADAL control questions

    What is the difference between the FADAL Multi-processor control and the MP 32?
    We have the Multi-processor on a 2001 4020HT and wondered why I have not seen any posts reflecting this control.

    Any comments are welcome...
    Thanks for your time,
    Respectfully, James Winn
    Reply With Quote Reply With Quote
  2. 05-02-2006, 02:54 PM #2
    Neal
    Neal is offline Registered
    Send a message via AIM to Neal
    Join Date
    Mar 2003
    Posts
    900
    Seirramachine--
    The MP CNC control is an updated version of the CNC 88HS control. The 32MP is the same control with an embedded Windows based PC included. The PC talks to the machine side via an RS-422 internal data link.

    Neal
    Reply With Quote Reply With Quote
  3. 05-02-2006, 03:35 PM #3
    SIERRAMACHINE
    SIERRAMACHINE is offline Registered
    Join Date
    Apr 2006
    Posts
    24
    Any known problems with the MPI need to be aware of?
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules