Pete,
We have a HPC-800 with a Acromatic 2100 fully rotary 7 pallet. We can put large truck engine blocks on the pallet tombstone and bore the cam & crankshaft bores, this is a big machine. I wrote the post for this machine and mp master will not work with our machine. drilling is nothing like fanuc and somewhat complex to set-up in the post, fixture offsets use H values. I'm sure we could use G54. We run the Machine at Cincinnati's recommendations and this works well for what we do. If you need to customize a post let me know I can help with this.
Steve Arteman
[email protected]
www.cad2cam.net
www.cad2cam.net
Programmer/ Certified Cam Instructor