i have ver21 bobcadcam, mach3 cam ,it works fair, get some screwy z moves sometimes, what i really need are instructions for this post proccessor or a post that will work with mach3 (with instructions) and ver21,,,help,,
larry
i have ver21 bobcadcam, mach3 cam ,it works fair, get some screwy z moves sometimes, what i really need are instructions for this post proccessor or a post that will work with mach3 (with instructions) and ver21,,,help,,
larry
Larry,
The Fanuc mill post should work with Mach 3. You can go to www.cadcamtrainer.com and download some of my videos from there. If you have problems with the post processor, you can either call Bobcad tech support guys and they will fix this for you or drop me a PM on my site and I will try to help you out. I also have a brand new video that shows how to tweak a post processor. The video will be uploaded on my site tonight along with few more that I haven't had a chance to finish until now. It is about 5 AM and worked on that stuff since 3AM....
Hope this helps,
Sorin
Any society that would give up a little liberty to gain a little security will deserve neither and lose both.
Benjamin Franklin
thansk for the info, i will review your site when i get some time tomorrow. i have since located a mach3 post proccessor from bobcad, but now am looking for instructions...you are right about fanuc and haas, i have been able to make them both work to some degree,, getsome screwy moves sometimes.
larry