On the Bridgeport Torq-Cut 22 we just bought, the CMOS battery was dead and the hard drive settings were therefore lost in the BIOS. We replaced the CMOS battery but we still have the issue with the hard drive. We looked up the specs of the hard drive and entered them in but it still wouldn't take them. I also read that some older motherboards will not accept a larger hard drive so we're wondering if that's the case here as well. Our hard drive is a Quantum Fireball ST 1.6AT (1.6Gb). Does someone have the same hard drive? If so, can you let me know what settings you have in the BIOS so we can try them? Thanks!
Results 1 to 2 of 2
-
10-26-2011, 09:29 PM #1
Registered
- Join Date
- Oct 2011
- Posts
- 0
Bridgeport Torq-Cut 22 lost hard drive settings
-
10-26-2011, 10:23 PM #2
Registered
- Join Date
- Sep 2011
- Posts
- 75
Try setting your harddrive in the bios to:
1024 cylinders 16 heads, 63 sectors 504mb
and see if that gets you going
There is so much info on here about this for the searching.
Good luck
Reply With QuoteSimilar Threads
-
Bridgeport Torq-cut 22 forgets its hard drive
By Alley-Way in forum Bridgeport / Hardinge MillsReplies: 16Last Post: 10-16-2016, 04:37 PM -
Bridgeport Discovery 308 SX-15 CMOS lost time and settings
By Richardd in forum Bridgeport / Hardinge MillsReplies: 7Last Post: 04-21-2016, 02:54 PM -
HAAS VF3 hard drive or no hard drive
By teal854t in forum Haas MillsReplies: 2Last Post: 08-18-2010, 03:27 PM -
Bridgeport Torq Cut 30
By charliemisa in forum Bridgeport / Hardinge MillsReplies: 3Last Post: 04-23-2010, 12:11 PM -
Bridgeport Discovery 308 SX-15 CMOS lost time and settings
By Richardd in forum DNC Problems and SolutionsReplies: 0Last Post: 06-23-2006, 01:01 AM
Tags for this Thread
Posting Permissions
