We recently bought a Mori lathe with this control from 1990. We have no data on it and not even sure what we have. Control indicates OT C series and the CRT indicates MFT-4. We have never had a machine with a Fanuc control. We can see already that there are a couple relays missing and need info to replace them. Does anyone have some tech documents they can send for these? What are the abilities of this control? We are a bit in the dark on this one. Thanks for any help you can offer.
Results 1 to 2 of 2
-
07-06-2007, 12:41 AM #1
Junior Member
- Join Date
- Nov 2006
- Posts
- 303
Fanuc OT-or MFT-4 control tech help
-
07-06-2007, 01:32 AM #2
Community Moderator
- Join Date
- Dec 2003
- Posts
- 24222
The first thing to do is back up the parameters, including the 900 options, if you don't have them, either on floppy or hard copy. There are a few past posts here on the procedure.
The Fanuc manuals help to a degree, but you also need the MTB schematics and ladder listing etc.
Al.CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
Reply With Quote
Similar Threads
-
fanuc 21t control
By Jedi in forum FanucReplies: 4Last Post: 06-26-2007, 01:39 PM -
FANUC OT control need dnc help
By mike10 in forum FanucReplies: 5Last Post: 10-17-2006, 09:27 PM -
Fanuc 18T control
By m_ghaff2000 in forum FanucReplies: 1Last Post: 09-26-2006, 01:05 PM -
Tech Questions, TC-2, Fanuc 2T, Program, Way Luber, and Servos
By RonRoy2004 in forum DNC Problems and SolutionsReplies: 0Last Post: 01-10-2006, 03:01 AM -
Need Fanuc Tech. help
By Gncc50 in forum FanucReplies: 0Last Post: 11-22-2005, 07:53 AM
Posting Permissions
