Hello,
I would like to see if anyone is interested in quoting 3 3d solid models.
They are for a scale model of a steam locomotive. I have attached a scan of the prototype
blueprint and some pictures. There are 3 dimensions which I have to have that might not correspond with the prototype drawing so I' ve attached a picture of my 2d autocad drawing.
if needed I can send a dxf file of my rough sketch. The 1.75 dimension from hole to hole is a final dimension as is the .75 thickness of the outer tread, however the 7.75 dia and the 1.0 thickness might change slightly. Also, I have more blueprints that I can scan and send that show a cross section for each wheel and tons of photos as well. The model would have to be a solid model for use with CAM software and compatible with Autocad 2007.
thank you
Harry Boivin