Hello all,
I'm needing to make a scale tire for a pickup truck my brother is building.
My first thought was to make a two part plaster mold, then join the two halves.
Fill with urethane until the mold was liberily coated. Let set and hope for the best. The tire needs to be 8.5" dia, 2.25" wide, -w- a hub of 4.5" dia.
What materials would be best to use.
Rather than carving out the treads, I was thinking we could use a bicycle tire as a tread pattern and fill with plaster to at least make the tread pattern.
TIA
Neil