Can anybody give how to view machine parameters and PLC programs in Heidenhain TNC 426 control used in Deckel Maho machines ?
Can anybody give how to view machine parameters and PLC programs in Heidenhain TNC 426 control used in Deckel Maho machines ?
[Prog Edit] Key
[MOD] key
Make sure you have a program called up in the [Prog Edit] screen
General Use Parameters: 123
Machine Parameters: 95148
PLC: 807667
Thanks for your post.
Dear all
Please advice how to adjust the backlash in heidenhain TNC 426 controller.
also give the parameter for adjusting the backlash.
Thanks and regards,
A.radhakrishnan
how do i re-load the software to a heidenhain 426 controller? i am having problems with the controller ereasing the program as it is running the program. i was told to re-load the soft ware for this controller. can anyone help with this. Thanks km8137
Can anybody help me with the files from the PLC directory from a milling machine DMC70V with TNC426 -SOFTWARE 280474 15. HDD is broken and the data from this folder I could not recover them.
dear All
1- for seeing parameter on TNC 426 go to Edit mode ---select any program ---push MOD ---put 95148 then ENTER ---- for getting out just push END
2-for adjust Back Lash try to correct value on MP710 as MP 710.0 X axis MP 710.1 Y axis MP 710.2 Z axis ....up to rest axis
3-for HDD broken you need to have A- software 28047415 ( i can send you all soft you want ) ,..let me have your email , also you need same HDD as its easy to find in your local market this is easy procedure i send you step by step ,..just needs the machine parameter list or any back up you have ,[email protected] please send me any things you have ,..if you dont have i have same machine under my service i can prepare HDD to send you ,..its your Call
thanks
regards
F.Sharifi
Can you help me MP file not running Heidenhain TNC 426???
https://www.youtube.com/watch?v=xgwH...ature=youtu.be
What happened now ?
Please I also need the plc software
[email protected]
- - - Updated - - -
Please I also need the plc software
[email protected]
Hi i have a tnc 426 and the hdd is about to die. can someone help me how to replace it urgently.
my email is [email protected]
Hello,
I need PLC software and MP for my deckel maho DMC70V milling maschine.
Heidenhain TNC 426/430.
NC Software 280476 18
Please can you send me?
Best regards