Hi all
First off, i have no experience whit CNC machines, but i wanted one, and it is to expensive to buy, so i decided to make one... so if my design is poor, i apologise :P
For a living i work as an automation technician so i understand how the machine moves and how the steppers, and controlboard works, so a little burden of my shoulders.
The machine has some extra holes in it, cause i build it one way, and then changed the design after, so some unnecessary holes, there is
-Basically the whole machine is made out of the sealink antenna by marlink, so if you study this picture, you will find alot of similarity's
As i never tought on making a build thread, i havent taken many pictures while building, so the pictures i have now is of an almost complete cnc mill.
But still some work to do, will be better whit the pictures
(beacause of the large images, i have made click links)
This is for my Z axe this is not complete yet.
http://arandeb.com/kjetta/fresen/1.jpg
This is the motor mount for the Z axe
http://arandeb.com/kjetta/fresen/2.jpg
This is how the Z axe moves
http://arandeb.com/kjetta/fresen/3.jpg
The ball bearings of the Z axe
http://arandeb.com/kjetta/fresen/4.jpg
All of the bearings of the Z axe
http://arandeb.com/kjetta/fresen/5.jpg
The Y axe, and a little of the X axis
http://arandeb.com/kjetta/fresen/6.jpg
How the X axis moves
http://arandeb.com/kjetta/fresen/7.jpg
The motor mount of the Y axis (the axle of the motor and the movment is a little off, but is now fixed
http://arandeb.com/kjetta/fresen/8.jpg
Motormount and mechanism of the X axe
http://arandeb.com/kjetta/fresen/9.jpg
The whole mill
http://arandeb.com/kjetta/fresen/10.jpg
This is what i have for now. I will come back whit more pictures as soon as i get them.
As said before, i have no experience, so this mabe a poor design, but i do the best whit what i got