I have the older machine. I have started a retrofit. I managed to find the air/hydraulic power drawbar, the pneumatic cylinder, air pressure switch and the pneumatic solenoid block. I was hoping to find someone that can give me good pictures of the mounting points for the pneumatic cylinder that swings the ATC arm in and out and the mounting points as well as the sheetmetal around the power drawbar and a look at what the cap for the hydraulic reservoir looks like.
Also some idea of which air line goes from the solenoid block to the ATC cylinder, power draw bar and air blast over the spindle.
Thank you very much in advance.
Marty
Mesa, AZ