Originally Posted by
Jan2000
Gday community, i have problem with my new seiki VK 45.
I got a seiki VK 45 and try to get here operating. So after i got here delivered and setted up i try to do the basic first steps. After zero return and spindle orientation i try i tool chance. Worked fine till she had to grab the tool. Toolarm stucks now right under the spindle. I checked all shorts, hydrolic/air pressure, the responsable leads, valves. After that i try in the maintance mode to bring the arm back in home position with the M-codes 103,104, 105 etc, what makes the toolarm drive back but then stuck again. (see pics). Please guys im on the end of my knowledge, if you have any tipps or something let me know. Cheers Jan