when you for example have a part with radius R5 and you select end mill diameter 10 exactly, solidcam will create toolpath as if you're creating a rectangle, so the toolpath will look something like x..y....x....y....(no G02 or G03).
when you select tool which is 9.98 or less in diameter, it will create normal toolpath with G02 or G03.
how to disable this behaviour and force it to always create G02 and G03?
because you can put tool diameter 8mm in machine and it would then still create R5, not R4.
this, my guess, should be somewhere in postprocessor, but where? or is it somewhere in solidcam settings?
thanks.